Alerts and events
Alerts and events shows the system events Airgate records (alerts, CoA, certificates, guests, configuration and admin changes), the alerts raised by alert rules, and the alert rules themselves. Use it to see what changed or went wrong in the tenant, and to be told when sign-in failures spike or a switch goes silent.
What this page shows
Section titled “What this page shows”Monitor › Alerts and events has three tabs:
| Tab | Content |
|---|---|
| Events | System events, newest first, default Last 24 hours. |
| Alerts | Alerts raised by alert rules. The tab shows the number of open and acknowledged alerts. |
| Alert rules | The rules that watch traffic. The tab shows the number of rules. Rules are evaluated every minute. |
Every trigger, re-notification and resolution of an alert is also published as a system.alert event, so it appears on the Events tab and is forwarded by webhooks and syslog export.
Fields and columns
Section titled “Fields and columns”Events
Section titled “Events”Four tiles count the events that match the filters: Events, Errors (alerts, failures), Warnings (CoA NAKs, quarantine, revocations) and Info (audit, guest, profiler). Select a tile to show only that level.
| Column | Meaning |
|---|---|
| Time | When the event happened, with a coloured bar for its level. |
| Level | ERROR, WARN or INFO. |
| Category | Alert, Audit, Accounting, Certificate, CoA, Configuration, Guest, Network device, Posture, Profiler, Reports or System. |
| Source | The module that raised the event, for example coa, guest or radius. |
| Description | What happened. |
| Topic | The event topic, for example coa.sent. |
Select a row to open the event panel: Time, Level, Category, Source, Topic (with Filter to show only that topic), Event ID and Record, the event Payload, and Related buttons to the objects the event is about, such as Open alert, Access Tracker · MAC or user, CoA log, Session, Audit log, Network device or Add the device, Scheduled reports, Guest accounts, Certificates or Device Insight. Newer and Older (or the arrow keys, j and k) step through the page.
Alerts
Section titled “Alerts”Four tiles: Open (not yet acknowledged), Acknowledged (someone is on it), Critical / error (active alerts of those severities) and Resolved. Select a tile to filter on it.
| Column | Meaning |
|---|---|
| Severity | INFO, WARN, ERROR or CRITICAL. |
| Status | open, acknowledged or resolved. |
| Alert | Rule name, rule type and the alert message. |
| Subject | What the alert is about, for example a user name, MAC address or network device. Empty for a tenant-wide alert. |
| Seen | How many evaluations found the condition. |
| Triggered | When the alert was raised. |
| Last seen | When the condition was last found. |
Select a row to open the alert panel: status, rule type, message, Subject, Severity, Triggered, Occurrences, Alert ID, a Timeline (triggered, last seen, last notification, acknowledged by, resolved by) and Details. The footer button opens the traffic behind the alert: Sign-in log (filtered on the user, MAC address, device or failures) or, for a misconfigured network device, Network devices.
Alert rules
Section titled “Alert rules”Tiles: Alert rules (with how many are enabled), Firing now, Disabled and Evaluation errors.
| Column | Meaning |
|---|---|
| On | Whether the rule is enabled. Disabling a rule resolves its open alerts. |
| Rule | Name, with System for a seeded rule. |
| Type | Rule type (see below). |
| Condition | The condition in one line, for example Reject rate > 50% in 5 min (≥ 20 requests). |
| Severity | Severity of the alerts it raises. |
| Open alerts | Number of open alerts; select it to see them. |
| Last evaluated | Time since the last evaluation, or the last evaluation error. |
Rule types and their parameters (defaults in brackets):
| Type | Fires when | Parameters |
|---|---|---|
| Reject ratio | The share of rejected authentications in the window exceeds the threshold. | Reject % above [50], Window [5 min], Minimum requests [20], Service, Protocol |
| Failed authentications | The number of failed requests in the window reaches the threshold. | Failures at least [50], Window [5 min], Service, Protocol |
| Repeated user failures | A user name fails at least the threshold in the window (one alert per user). | Failures per user at least [10], Window [10 min], Service, Protocol |
| Slow authentications | The 95th percentile latency exceeds the threshold. | p95 latency above [3000 ms], Window [5 min], Minimum requests [20], Service, Protocol |
| Silent network device | An enabled NAD that sent requests before has been silent longer than the threshold (one alert per NAD). | Silent for more than [60 min], Ignore NADs silent longer than [0 h = no limit], Only these devices |
| Misconfigured network device | A device sent RADIUS or TACACS+ with the wrong shared secret, from an address that is not a network device, or while it may not (disabled, behind an edge connector). | Window [30 min, at least 15]: the alert resolves when the device has not misbehaved for this long. |
| Watchlist activity | A watched user name or MAC address makes any request. | Usernames, MAC addresses, Window [5 min], Service, Protocol |
The rule form also has Name, Severity, Description, Re-notify every (minutes while it keeps firing; 0 = notify once), Auto-resolve when the condition clears and Enabled.
Actions
Section titled “Actions”Events tab
Section titled “Events tab”| Action | What it does |
|---|---|
| Time range | All time, Last hour, Last 24 hours, Last 7 days, Last 30 days, Last 90 days, Today, Yesterday, This month, Last month or Custom range…. |
| Level | ERROR, WARN, INFO (one or more). |
| All categories, All sources, All topics | Filter on category, source module or topic. |
| Search description, topic… | Free-text search. |
| Clear filters | Resets every filter. |
| Newest first / Oldest first | Sort order. |
| Live (15 s) | Reloads the list every 15 seconds. |
| Export CSV | Downloads the filtered events as system-events.csv (up to 100,000 rows, at most 400 days). The Source filter is not applied to the export. |
| Refresh | Reloads the list. |
Counts stop at 10,000; narrow the time range to page further.
Alerts tab
Section titled “Alerts tab”| Action | What it does |
|---|---|
| Status, Severity, All rules, Time range, Search message, rule, subject… | Filter the alerts. By default Open and Acknowledged are shown. |
| Ack / Acknowledge | Marks an open alert as acknowledged. |
| Resolve | After confirmation, closes the alert. If the condition still holds at the next evaluation, the rule opens a new alert. |
| Bulk Acknowledge, Resolve | Applies to the selected alerts. |
| Refresh | Reloads. The tab also reloads every 30 seconds. |
Alert rules tab
Section titled “Alert rules tab”| Action | What it does |
|---|---|
| Search rules…, All rule types | Filter the rules. |
| New alert rule | Opens the rule form. |
| Edit | Changes a rule. A system rule keeps its name and type and cannot be deleted; tune its thresholds or disable it. |
| Test now | Evaluates the rule against the last window without saving and shows whether it Would fire, with the subjects and values. |
| On switch, bulk Enable / Disable | Enables or disables rules. |
| Delete, bulk Delete | Deletes rules after confirmation. System rules are skipped. |
| Open alerts count | Opens the Alerts tab filtered on the rule. |
Permissions
Section titled “Permissions”- View:
monitor:read: Tenant Administrator, Network Administrator, Help Desk, Read-only Administrator and Platform Administrator. - Change/act: acknowledging and resolving alerts, and creating, editing, testing, enabling and deleting alert rules need
admin:write: Tenant Administrator and Platform Administrator.